|
7700 Series Signal Conditioners
The most popular and flexible of the available signal conditioners is the Model 13-7715-59 Universal XE. The Universal XE signal conditioner, Model 13-7715-59, provides an all-purpose or “Universal” input for physiological signals brought into the ACQ-7700 Acquisition Interface Unit. The Universal XE signal conditioner has the ability to handle a wide variety of signals such as bio-potential signals, pulmonary pressure and flow signals, blood pressure and flow signals, tension and isolated tissue signal, temperature signals, and various other inputs. Thus, it eliminates the need to purchase numerous signal conditioners and amplifiers to achieve the same results as just one Universal XE signal conditioner. Additionally, the Universal XE delivers four channels per signal conditioner making it a very cost effective choice. |
|
|
The 13-7715-35 Carrier signal conditioner was designed to marry with the Validyne DP-45 and DP-250 Pressure Transducers for accurate pulmonary pressure, volume and flow measurements. Coupled with the Pulmonary Air Flow (PAF), Pulmonary Compliance and Resistance (PCR), and Unrestrained Plethysmography (URP) software analysis modules, DSI/Ponemah can record and analyze data from virtually any pulmonary application. |
|
|
The Digital Communication Module (DCOM) provides a communication link between external pods and the 7700 series chassis. This allows external pods to be placed next to the preparation for ease in manipulating lead placement, while permitting the chassis to remain on the lab bench or rack. This is achieved by using an extended cable to link the external pod to the DCOM module. |
|
Advanced Basic DC 4 Signal Conditioner A perfect solution to bringing in a variety of high level signals into the 7700 Series platform is the ABDC 4 Signal Conditioner, model 13-7715-04. This signal conditioner provides a simple connection to the analog output of many laboratory devices. |
 |
Advanced Basic DC 32 Signal Conditioner The ABDC 32 signal conditioner, model 13-7715-02, allows simultaneous sampling of up to 32 sources at one time from just one module. Utilizing the input terminal box, connections can be made to the amplifier by simple BNC connections allowing for quick input changes. With its ability to take Bi-polar measurements, the signal can be truly maximized over the full scale. In addition to Bi-polar measurements, the data is recorded to 16 Bit resolution yielding extremely high precision. |
|
|
The 13-7715-68 D/A Module features 16 channels of Digital-to-Analog output for use with other equipment. It provides Filtering, Output Resolution and user selectable Output Ranges as well as automatic calculation of Units/ Volts of the Output signal. |
|
|
The 13-7715-09 Math Module utilizes a graphical interface for configuration of user specific math functions. These math functions can be applied to active channels collected from any 7700 series signal conditioner. Examples of the utility of the Math Module would include subtraction of two separate pressure channels, integration of bio-potentials, as well as statistical calculations. |
|
